Dry ball press

Category: New Equipment

The impact breaker is mainly composed of a rotor, rack, impact rack, frame, the ratchet wheel renovate device and a transmission part. It is a kind of crushing machine which can use the impact energy to break the material. When the material from the feed port into the flat hammer function area, broken by the high impact of the flat hammer,and is thrown to the impact device ,which is installed above rotor and breaken again. This process is repeated until the material is broken to the required size and is discharged from the outlet of the lower part of the machine. Adjusting the gap between the counter frame and the rotor frame can achieve the purpose of changing the size of the material and the shape of the material.

Model Project	Rotor spec (mm)	Feed opening (mm)	Max feed edge (mm)	Capacity (t/h)	Motor power (kW)
HC128(A)	Φ1000x700	750x620	300	35-60	37-55
HC139(A)	Φ1000x1000	1100x630	400	60-100	55-75
HC239(A)	Φ1200x1000	1100x740	500	90-140	110-132
HC255(A)	Φ1200x1400	1450x760	500	120-200	132-160
HC359(A)	Φ1300x1500	1550x1070	600	180-280	200-250
HC459(A)	Φ1400x1500	1550x1130	650	220-450	250-315
HC579(A)	Φ1500x2000	2050x1060	700	250-550
HC679(A)	Φ1600x2000	2050x1280	800	300-600	440-560
HC779(A)	Φ1500x2000	2050x1670	1000	500-850	630
HC898(A)	Φ2000x2500	2540x1845	1000	800-1200	1250

Dry ball press

Product overview